Woodworking Products by Trend  Woodworking Products by Triton  Woodworking Products by Veritas  Woodworking Products by Robert Sorby  Woodworking Products by Tormek  Proxxon Tools  Woodworking Products by Liberon  Woodworking Machinery by SIP  Woodworking Machinery by Charnwood  Woodworking Glue by Gorilla

The Woodworking Centre - for all your woodworking needs

Online Catalogue > Brands > Triton Woodworking Tools > Triton Spare Parts > Spares for Workcentre Mk3 >  WCA001 - Mk3 Workcentre


WCA001 - Mk3 Workcentre

WHEEL KIT MARK 111 - Click to change size
Click to change size

WHEEL KIT MARK 111

Manuf. Ref : AWA001

19.40

Quantity:  


The wheel kit for the Mk3 bolts onto one of the diagonal strusts on the leg stand. It can be locked and unlocked by pushing down with your foot.

Manufacturer's Product Code : AWA001

Upgrade Guard for Dust Collection - Click to change size
Click to change size

Upgrade Guard for Dust Collection

Manuf. Ref : DCA001


No longer available from Triton. We hope this will come back into stock in due course.

The upgrade guard is fitted to the old model Mark III Workcentres. It uses the polycarbonate Series 2000 guard mounted on a specially made guard support, which may be bolted on to the Mk III.

For those unfamiliar with this guard, it is not only clear, so the work can be seen, it has a dust extraction port, height adjustment with two anti kickback hold down fingers providing increased safety.

Manufacturer's Product Code : DCA001

Manuf. Ref : PUA006  Instruction Manual  
This manual is no longer available in print, but may downloaded from our parts and manuals page see towards the bottom of the page in the following following, click here.:


Manufacturer's Product Code : PUA006
Table / Chassis Locking lugs - Click to change size
Click to change size

Table / Chassis Locking lugs

Manuf. Ref : WCA014

12.00

Quantity:  




Manufacturer's Product Code : WCA014

Table Scales (EACH) - Click to change size
Click to change size

Table Scales (EACH)

Manuf. Ref : WCA016


These scales are now being made by a customer in Australia. If needing to buy a set, please contact us via e-mail.

Manufacturer's Product Code : WCA016

Manuf. Ref : WCA034  Workstops Notched  
Although Triton can no longer supply the Workstops WCA034 and WCA038, the Series 2000 Crosscut Fence (WCA338) will fit, and can be used instead with no adaptation required.

Manufacturer's Product Code : WCA034
Manuf. Ref : WCA038  Workstops Plain  
Although Triton can no longer supply the Workstops WCA034 and WCA038, the Series 2000 Crosscut Fence (WCA338) will fit, and can be used instead with no adaptation required.

Manufacturer's Product Code : WCA038
Cross-Cut Fence (complete with fittings) - Click to change size
Click to change size

Cross-Cut Fence (complete with fittings)

Manuf. Ref : WCA338

27.60

Quantity:  


This fence is fitted to the Workcentre when in cross cut mode. Can be fitted to the Series 2000 or earlier Mk3 models. The MDF face comes as one long piece. When the saw is correctly "zeroed" and at 90 degrees, a cut is made through the face, thus indicating exactly where the cut will be when in use.

Manufacturer's Product Code : WCA338

Manuf. Ref : WCA042  Overhead Guard complete (with WCA045)  
The original orange coloured Mk3 guard is no longer available. However, Triton adapted the Mk3 riving knife to take the Series 2000 guard. This available under part DCA001

Manufacturer's Product Code : WCA042
Manuf. Ref : WCA126  T Knob(each)  
1.88
No longer available

Manufacturer's Product Code : WCA126
Manuf. Ref : WCA150  Protractor Sandpaper facings (set of 2)  
3.37
No longer available

Manufacturer's Product Code : WCA150
Manuf. Ref : WCA448  Bearing Channel Kit (Set of 2)  
17.26
No longer available

Manufacturer's Product Code : WCA448