Trend Router Cutters - Specialist Application & Trimming Cutters

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £32.40 (Including VAT at 20%)    

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £34.20 (Including VAT at 20%)    

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £35.40 (Including VAT at 20%)    

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £54.60 (Including VAT at 20%)    

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £43.20 (Including VAT at 20%)    

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £28.80 (Including VAT at 20%)    

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. ...


Price: £27.60 (Including VAT at 20%)    

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay. ...


Price: £58.20 (Including VAT at 20%)    

Cutter for trimming and bevelling timber, lippings and plastic laminate. Can only be used in laminate trimming routers, or when ...


Price: £25.20 (Including VAT at 20%)    

Cut a wider edge line, at an angle of 80 degrees. A 16mm bearing is supplied as standard. ...


Price: £40.80 (Including VAT at 20%)    

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted ...


Price: £67.20 (Including VAT at 20%)    

For trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings mounted ...


Price: £34.20 (Including VAT at 20%)    

Cutter for machining acrylic & plastics with low melting point. Two flute for fine finish. Use Trendicote to enhance ...


Price: £22.20 (Including VAT at 20%)    

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £57.60 (Including VAT at 20%)    

Profiler with shank mounted bearing for guidance. For use with router mounted above or below a table when following a ...


Price: £54.60 (Including VAT at 20%)    

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings ...


Price: £57.00 (Including VAT at 20%)    

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings ...


Price: £67.20 (Including VAT at 20%)    

Ideal for fluting spindles and other decorative turned work. Has a small flat ground on the nose that produces a ...


Price: £12.60 (Including VAT at 20%)    

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings ...


Price: £42.60 (Including VAT at 20%)    

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings ...


Price: £41.40 (Including VAT at 20%)    

Cutter for trimming and bevelling timber, lippings and plastic laminate edges or any shaping applications. Self-guiding trimmer with bearings ...


Price: £42.00 (Including VAT at 20%)    

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread ...


Price: £14.40 (Including VAT at 20%)    

Cutter for machining acrylic & plastics with low melting point. Two flute for fine finish. Use Trendicote to enhance ...


Price: £21.00 (Including VAT at 20%)    

This cutter is self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. Alternative bearings ...


Price: £30.60 (Including VAT at 20%)    

This cutter is self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. Alternative bearings ...


Price: £26.40 (Including VAT at 20%)    

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath.


Price: £28.80 (Including VAT at 20%)    

Self-guiding chamfer/bevel cutter. Bearing follows the board beneath.


Price: £24.60 (Including VAT at 20%)    

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to ...


Price: £16.20 (Including VAT at 20%)    

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to ...


Price: £16.80 (Including VAT at 20%)    

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to ...


Price: £18.60 (Including VAT at 20%)    

Three flute self-guiding for extra fine trimming of laminate or plywood overlay.


Price: £16.20 (Including VAT at 20%)    

Neatly cuts grooves on doors or frames to accept Intumescent Strip. For use with seals of 10mm width and 4mm ...


Price: £26.40 (Including VAT at 20%)