Spares for WCB220 - Workcentre Series 2000

Click to change size

Clamp set for holding power saw to Sliding Chassis (WCA400)

Manufacturer's Product Code : CMA024

Click to change size

Angled plastic feet for Workcentre legs.

Manufacturer's Product Code : CMA042

Click to change size

Stop plate for the current Workcentre. Remember when ordering this item to also order the fixing pin (CMA062).

The early Workcentres pre serial number 59140 and Mk3's used a similar plate which had a different fixing method.

Manufacturer's Product Code : CMA048

Click to change size

This pin is for use with the CMA048 Stop Plate

Manufacturer's Product Code : CMA062

Click to change size

This replacement "No Volt Release Switch" is fitted to the CMA050-110 switch box. It will not fit earlier models. If in doubt, call us.

Under no circumstances should this be fitted to any 240volt equipment.

Click to change size

This pair of hold down fingers help to keep the material steady whilst cutting, as well as reducing the risk of "kick back". If you are ordering a complete WCA333 blade guard, these fingers are included.

Manufacturer's Product Code : WCA192

Click to change size

Leg for use on all Series 2000 Workcentres. Does not fit the earlier Mk3.

Manufacturer's Product Code : WCA204

Click to change size

Plastic end cap for Workcentre fence extrusion.

Manufacturer's Product Code : WCA217

Click to change size

Plastic end cap for Workcentre fence extrusion.

Manufacturer's Product Code : WCA218

Click to change size

For indicating the position of the protractor swivel lock.

Manufacturer's Product Code : WCA223

Click to change size

Aluminium extruded "top" bearing channel for Triton Series 2000 Workcentre. When fitting, these must never be hit or forced, as the aluminium can be bent. They will click into place if carefully positioned into the end panels.

Manufacturer's Product Code : WCA247

Click to change size

Protractor for the Series 2000 Workcentre, ready for use.

These will not fit the Mk3 Workcentre, however, I have come across some owners who using their metal working skills have adapted these to fit a Mk3 and even home made router tables.

Manufacturer's Product Code : WCA251

Click to change size

For supporting the Table Top when using the Workcentre in cross cut model. The support rails can be used in the Series 2000 or earlier Mk3 Workcentres.

Manufacturer's Product Code : WCA254

Click to change size

Series 2000 Base Channel.

Manufacturer's Product Code : WCA256

Click to change size

Manufacturer's Product Code : WCA267

Click to change size

End panel for the rear (or non operator) end.

Do not try using this to convert an old Mk3. It is for the current Series 2000 Workcentre only.

Manufacturer's Product Code : WCA279

Click to change size

Inserted into the table support rail locking knobs, these hangers are useful for hanging pushsticks or other items required for handy use. Do not hang heavy items as they are only push in fit.

Manufacturer's Product Code : WCA281

Click to change size

Nylon Scale Indicator to ensure table is level when adjusting table height in cross cut mode.

See also WCA343 "Support Kit".

Manufacturer's Product Code : WCA285

Click to change size

Have you ever had that sinking feeling when you have cut the saw table rather than your piece of wood? Well this replacement infill strip solves the problem. You will need to drill out the pop rivets holding the strip in place, but the replacement comes with little countersunk screws with nuts to fix it.

Customers buying this item often also require the replacement Guard Support/Riving Knife WCA334.

Next time make sure the saw slide chassis is locked and cannot slide in the channels.

Manufacturer's Product Code : WCA330

Click to change size

Manufacturer's Product Code : WCA332

Click to change size

Polycarbonate guard fitted to the Series 2000 Workcentre. Also fitted to the DCA001 replacement guard for the earlier MK3s.

The guard comes with a pair of work hold down fingers, dust extraction point with cap to accept CMA083 bayonet fitting adaptor and adjusting height knob.

Manufacturer's Product Code : WCA333

Click to change size

Locking down knob for Protractor

Manufacturer's Product Code : WCA335

Click to change size

Bevel Guides to suit Series 2000 Workcentre fence

Manufacturer's Product Code : WCA337

Click to change size

These levers are fitted to the end panel Fence Track Outer sections, and are adjustable to ensure that the fence arms can be locked securely but not overtightened. A quick and effective way to adjust the fence.

Manufacturer's Product Code : WCA342

Click to change size

Nylon Scale Indicator, knob and bolt kit, to ensure table is level when adjusting table height in cross cut mode.
Knob also fits WCA333 Overhead Guard

Manufacturer's Product Code : WCA343

Click to change size

Side guard, mounted on the Saw Slide Chassis (WCA400). Ensures that you don't catch the blade if putting your hand under the table for any reason.

Manufacturer's Product Code : WCA388

Click to change size

The table infill strips are the outer two on the Workcentre. Can be fitted either as a replacement for a damaged strip, in which case you will need to drill out the pop rivets holding the strip in place, but the replacement comes with little countersunk screws with nuts to fix it. You could, I suppose, use this if you wanted to fit the Protractor WCA251 into, say, a home made router table.

Manufacturer's Product Code : WCA446

No longer available

Manufacturer's Product Code : WCA033

Click to change size

Now changed, see WCA279

Manufacturer's Product Code : WCA278