Triton Woodworking Special Offers

A sturdy storage system for timber, pipes and other long items.Suits internal or external mounting applications.
Six levels, each with a generous storage capacity of 50kg (110lb) per level.
Easy installation in workshops, garages, sheds, fences, walls, etc.

A sturdy storage system for timber, pipes and other long items.

Suits internal or external mounting applications.

Features
• Six levels, each with a generous storage capacity of 50kg (110lb) per level.
• Easy installation in workshops, garages, sheds, fences, walls, etc

Designed by woodworkers for woodworking, the Triton Workcentre 2000 is the cornerstone of the Triton workshop system. With a Triton Workcentre 2000, the joys of woodwork are at your fingertips!

Strong, fully portable and space efficient, the Workcentre has professional capabilities and accuracy and is tough enough for daily use.

The Triton Workcentre 2000 converts between a tablesaw and a crosscut saw in around 40 seconds for many varied cuts.

The Series 2000 Workcentre allows you to fit your own power saw to get accurate results every time. It also accepts most routers, jigsaws, and planers with the use of optional accessories.

Indoor or outdoor furniture, bookshelves, toys, timber decks and pergolas, even major projects like kitchen and bathroom renovations or extensions are all made easy using the Triton Series 2000 Workcentre.

VERSATILE
- Use your power tools right way up or upside down - you've always got the right tool for the job. The tools are clamped into preset locations, so you can remove and refit them quickly if you need to use them hand-held.

ACCURATE
- Precision cutting in all modes. Crosscut or cross-trench 600 mm wide within an accuracy of +/- 1 mm.

SAFE
- Your power tools are securely clamped for total control. Includes two safety guards, many built-in safety features, and a 16 Amp double pole safety switch which can be shut off "hands free" for additional safety.

SPECIFICATIONS
- Suits: Most circular saws (184mm - 235mm / 71/4" - 91/4")
- Cuts: Rip, mitre, 45° bevel rip, crosscut, bevel crosscut, & compound mitre.
- Rip capacity: 0 - 620mm (24")
- Crosscut capacity: up to 700mm (27") wide
- Standing size: 900mm x 600mm x 1300mm (35" x 24" x 51") approx.
- Folded size: 350mm x 440mm x 1000mm (14" x 17" x 39") approx.
- Weight: 35kg (77lb) (plus power tool) approx.

With the use of optional accessories it can also be used as a:

• Overhead router
• Router shaper table
• Jigsaw table
• Finger Jointer
• Biscuit joiner
• Edge planer
• Face plate sander
• Panel saw

Provides quick and precise blade height adjustment.

Control blade height by a winder through the table slot, or by a knob in crosscut mode.

Allows your saw to remain at its full depth, in its most stable position.

A powerful 2400w (3½ hp) 235mm/9¼" circular saw designed specifically for use in Triton saw benches.
Features:

Pre-set bevel stops allow quick and precise bevel adjustment to 5 common angles.
An over-ride button enables free-range adjustment.
Repositionable height lever provides quick height adjustment, which can be fine-tuned using a micro adjustment knob.
Secure mountings.
Strong die-cast base ensure this is the saw most suited for bench mounting.Alignment cams for late model Triton Workcentres and Saw Tables.

1. Smooth, powerful 2400W* motor with needle and ball bearing construction
2. Highly accurate calibration scale with quick-action bevel stops at 0°, 15°, 22 ½°, 30°, 45°
3. Blade bevel trimmer
4. Inner and outer sighting notches for greater accuracy when hand-held
5. High quality 40 tooth Triton TCT blade
6. Ripping guide
7. Strong, die-cast aluminium baseplate machined for perfect accuracy
8. Locking rear pivot for extra stability
9. Sawdust extraction port
10. Onboard spanner
11. Heavy duty height adjustment assembly for excellent saw rigidity at all depth settings
12. Micro adjuster for accurate, one-handed blade height setting
13. Easy access height setting lever (repositionable)
14. Alignment cam locations for use with Triton saw benches
15. Spindle lock for easy blade changing

Precise Settings
-Blade angle trimmer allows initial fine tuning for perfect bevels.
-The micro-adjustment knob allows up to 6mm of fine-tuning adjustment of the blade, from any selected height setting.
- One-handed adjustment of the blade height, even from inside a dust bag.

Micro-alignment of the saw
A set of two alignment cams and mounting bases are supplied with the new pressed steel slide chassis of the Workcentre (s/no. 335,000+). They enable the baseplate to be finely adjusted left or right at the front and rear of the saw during initial setting up. And they make the Triton saw easy to fit, and ensure it is always perfectly aligned with the overhead guard support and the rip fence.

Specification:

Motor: 2400W
Speed: 4100 min-1
Blade: 235mm (9¼in), 40 tooth Triton Premium TCT - 25mm arbor

Cut depth:
0° - 82mm
45° - 61mm

Bevel Adjustment: -1º to 46º
Stops at 0°, 15°, 221/2°, 30° & 45°.

The Triton 2000W ½" Router is the perfect companion for any router table. Fast, trouble-free cutter changing from beyond the base and above the table, with just one spanner. No more skinned knuckles!



With an innovative guide plate, incorporating a fully adjustable fence and circle cutting, the Triton Router is equally suited to hand-held use. A powerful, smooth 3¼hp motor with soft start and variable speed features ensures the Triton Router glides effortlessly and cleanly through the toughest jobs.

3 modes of depth setting to suit every job
Rack & pinion winder handle for single-handed, accurate and fast depth adjustment.
Fine tune depth adjustment throughout the full plunge range using the micro winder.
Conventional 'free' plunge for fast, coarse depth adjustment

Ideal for table mounting
Designed specifically with table mounting in mind, the Router is the perfect companion for any router table. Quick and accurate cutter adjustments are made easy using the 'through-base' collet access and unique depth controls. Triton Dust Collector hoses screw straight on for highly effective chip extraction above and below the table. An easily removable plunge spring reduces plunge resistance when table mounted.

Perfect when hand held
Powered by a smooth 2000W* motor with soft start and variable speed features, the Router glides effortlessly and cleanly through the toughest jobs. Fully enclosed front and rear safety shields ensure safe operation and very effective dust extraction, and they can even remain fitted when changing cutters. Twin turret stops and three modes of depth adjustment provide maximum control over cut accuracy.
Features
1. Fully enclosed safety shields (remain fitted when changing bits)
2. Illuminated switch with shutter to prevent accidental starting
3. Powerful 3¼ hp motor with soft start
4. Easy to set turret stops with direct reading calibrations
5. Multi-function fence. Incorporates extended baseplate and circle cutting features
6. Variable speed (8,000 to 20,000 rpm) with speed maintenance under load
7. Removable plunge spring reduces plunge resistance when table-mounted
8. Plunge locking lever
9. Winder handle rack-and-pinion plunge for fast depth adjustment
10. Conversion switch for plunge or winder depth setting
11. Micro-winder for precise depth setting through the full range
12. Large bore dust port for effective chip extraction
13. ½" collet (with ¼" reducer)
14. Shaft lock automatically engages in cutter change mode
15. Triton ½" Premium TCT Router Bit included

This item is now back in stock.

This optional accessory for the Triton Router enables routing of letters and custom templates. It can also be used with dovetail jigs.
7 popular sized guide bushes are provided.

Features:

Seven piece, machined and plated brass guide bushings - fits Triton TRC001.
Ventilated to optimize the dust extraction performance of the Triton router
Includes mounting plate, spacer ring for table use, and alignment bushing

This product is not currently available.

Bolt-on jaws for heavy duty metal work.

Manufactured from strong ductile cast iron, shaped to increase grip on pipe or bar (up to 50mm / 2" diameter) with an anvil face for heavy metal work.

The teeth give a tenacious grip when chainsawing, drilling, sawing or rebating logs upto 250mm/10" in diameter.

Will grip up to a diameter of 250mm. Ideally suited for chain sawing, drilling, rebating etc. Manufactured from zinc-plated steel which resists corrosion.

Keep all your tools handy with the optional Tool Tray.

Not compatible with the obsolete SJA001 Superjaws

Keep all your tools handy with the optional Tool Tray.

Cleverly acts as a work support as well.

Superjaws is the workstation you take right to the job - indoors, outdoors, construction sites or the factory floor.

Applications and Benefits:
• Fast and easy clamping.
• The adjustment of the jaw opening is instantaneous - no handles to wind.
• Simply slide the moving jaw up to the workpiece, and press the foot pedal to apply exactly the force you want.
• Locking at the desired pressure is automatic.
• To unlock, simply strike the release plate for instant release. The clamping range is huge - from 0 to 900 mm (35"), with adjustment in seconds.
• You can clamp anything from thin sheet metal - to a door lying flat.
• The clamping range is huge - from 0 to 900 mm (35"), with adjustment in seconds.
• The tripod base is incredibly stable on all terrains and folds down in seconds for convenient transportation and storage.
• The front jaw is for heavy duty construction, enabling use as an anvil - for shaping or bending material.
• Simply slide the moving jaw up to the workpiece, and press the foot pedal to apply exactly the force you want.
• Pull out the lock plate to lock at the desired pressure.
• And when you're finished, Superjaws folds down to a compact size for easy transport or storage.

Powerful
The foot pedal operation provides powerful mechanical advantage.
• You can exert 1,000kg (2,240lb) of brute force - or just apply a light pressure for easily bruised materials.
• Pushing in the release plate over-rides the automatic locking so you can use Superjaws as a powerful press for bearings, sprockets, shafts, etc.
• As well, the heavy duty front jaw can be used as an anvil, for shaping or bending material.
• To unlock, simply strike the release plate for instant release.

Multiple Applications
• Super-wide clamping handles jobs with ease.
• Great for chainsawing, with optional jaws
• 360° access to your work
• Heavy duty contruction takes a real hammering
• Use it as a powerful press

Other Information
Optional Accessories
Keep all your tools handy with the optional Tool Tray.

Cast Engineer Jaws
• Bolt-on jaws for heavy duty metal work.
• Manufactured from strong ductile cast iron, shaped to increase grip on pipe or bar, (up to 50mm, 2" diameter) with an anvil face for heavy metal work.

Log and Pole Gripping Jaws
• The teeth give a tenacious grip whenever chain sawing, drilling, sawing or rebating timber logs up to 250mm (10") in diameter.

Optional features
• Log Jaws (optional) - SJA460
• Cast Engineers Jaws (optional) - SJA470
• Extension Tray (optional) - SJA420

Fitting a Triton Router Table to the Triton Workcentre or Router Stand adds a whole new dimension to your woodworking capabilities.

Fit your router to shape, plane, rebate, trench, mould and groove.

A New Dimension to Your Woodworking

Fitting a Triton Router Table to the Triton Workcentre or Router Stand adds a whole new dimension to your woodworking capabilities.

Fit your router to shape, plane, rebate, trench, mould and groove. Whatever the job the Triton Router Table offers remarkable accuracy, exceptional versatility and enhanced safety including:
• Moulding against the fence.
• End grain work on the sliding protractor
• Planing on the Series 2000 Workcentre
• Safe, hand-free operation

Features
• Large, rigid work surface
• MDF adjustable fence faces
• Fully tuneable fence & micro fence adjusters for rebating and planing
• Planing shims for 0.5, 1.0, 1.5 and 2.5mm planing cuts
• Adjustable safety guard with dust port
• Sliding insert for trenching and end grain work
• Double-sided protractor with 90° range
• Adjustable side pressure fingers
• Adjustable downward pressure fingers
• Small and large cutter inserts
• Easy reference scales in metric and imperial measurements
• Strong router mounting plate with heavy-duty clamps
• Alignment tool for set-up of ¼" and ½" routers

Compatibility
• Suits the Series 2000 Workcentre, the MK3 Workcentre and all Triton Router Stands.
• Suits most ½" and ¼" routers - "D" handle models not suitable.
• Triton Precision Router is recommended.

The following Triton Accessories can be fitted (see links top right of screen):
- Router Stand (RSA300)
-­ Jigsaw Kit (AJA300)
-­ Biscuit Joiner (BJA300)
-­ Biscuit Joiner (BJA001) - suits most earlier model Router Tables
-­ Finger Jointer

Fitting a Triton Router Table to the independent Router Stand enables the Workcentre to be left set up for sawing applications.

Fitting a Triton Router Table to the independent Router Stand enables the Workcentre to be left set up for sawing applications.

Features
• Fitted with safety ON/OFF switch.
• Adjustable leg height for uneven ground.
• Onboard leg storage for portability.

Compatibility
• Suits all Triton Router Tables.

A multi-purpose support stand with an advanced method of material handling and support.

A multi-purpose support stand with an advanced method of material handling and support. With a clamp built into the tilting and swivelling head, it does much more - at home or on site.

- Extra-wide tripod base for excellent stability on level or uneven ground.
- Low-friction slide surfaces for smooth, controlled travel of the workpiece.
- Swivelling and tilting head clamps pieces of wood to give many applications from hanging a door to holding a spotlight.
- Height adjusts from 635 - 940 mm (25" to 37") and folds for easy transport and storage.
- Supports over 100Kg (220lb).

The Triton 1400W ½" Router is the perfect companion for any router table. Fast, trouble-free cutter changing from beyond the base and above the table, with just one spanner. No more skinned knuckles!

Makes bit changes easy and fast!

For a winder handle plunge adjustment that provides fast depth adjustment the 1400W ½ Plunge Router is the product to choose.
Features
-Micro winder enables continuous fine depth adjustment.
-Micro winder enables continuous fine depth adjustment through full plunge range.
-Push button plunge conversion activates conventional plunge mode.
-Compact size perfect for hand held use and table mounting.
-Easy set, direct reading3 stage turret for precise preset cut depths.
-Safety switch shutter locks closed in bit change mode to prevent power on.
-Soft start and variable speed (with maintenance under load) provides the perfect speed for all cutter types.
-Removable plunge spring for easy bit adjustment when table mounted.
-Fully enclosed guarding provides maximum protection form the cut zone.
-Dust port connects to any 38mm (1 ½in) O.D. vacuum hose.
-Through-table winder accessory available. Kit includes template guides and dust chute (part no. TGA150).
-Multi function fence:
- Extended base for greater stability.
- Full fence adjustment for trenching etc.
- Built in circle cutter.

Motor: 1400W. Soft start.
Speed: 8,000 - 21,000min-1 Speed maintenance under load
Collet: ½in with ¼in reducer

Depth:
1. Winder handle rack and pinion adjustment
2. Micro winder
3. Conventional 'free' plunge

Bit changes: Through-base, single spanner action. Auto shaft lock.

Triton's Finger Jointer fits straight to the Triton Router Table for easy, accurate and attractive box joints.

Triton's Finger Jointer fits straight to the Triton Router Table for easy, accurate and attractive box joints.

Features
• The simple way to make perfect 1/4" and 1/2" box joints in any board thicknesses, from 3mm (1/8") to 32mm (11/4").
• Cut several joints at the same time.

Compatibility
• Only suits Triton Router Table model RTA300.

Huge capacity and easy-to-read calibration scales allow one person to effortlessly cut large sheets.

Table can be locked in position for conventional ripping of wide workpieces. Table can also slide for use as a panel saw.

The patented rip fence design allows fence settings at all angles, either leading or trailing edge, making mitre and taper cuts easy and precise.

Free-standing outer track allows operator to walk behind the sliding table, in full control.

Dismantles in seconds and takes up very little space, hanging on a wall or standing in a corner.

Handle sheets up to 1200mm (4') wide.

Crosscut up to 1200mm (4').

Built-in fence clamps hold awkward workpieces securely to the table and fence.

Huge capacity and easy-to-read calibration scales allow one person to effortlessly cut large sheets.

- Table can be locked in position for conventional ripping of wide workpieces. Table can also slide for use as a panel saw.
- The patented rip fence design allows fence settings at all angles, either leading or trailing edge, making mitre and taper cuts easy and precise.
- Free-standing outer track allows operator to walk behind the sliding table, in full control.
- Dismantles in seconds and takes up very little space, hanging on a wall or standing in a corner.
- Handle sheets up to 1000mm (3'3") wide.
- Crosscut up to 600mm (2').

Take control of your electric planer and get professional results every time.

Accurate
Combines the clean finish of an electric planer with the rigid guidance of a Triton Workcentre - for perfectly smooth, straight faces on all your work.

Clean
Dust hose and detachable collection bag included for a clean environment.

Safe
Protection from the planer cutters is provided by a spring-loaded safety guard. Includes a separate switch box with safety shut-off for independent operation of your planer.

Convenient
Quickly folds for fast changes between planer and saw modes. When not in use can be left folded or quickly and easily detached for storage.

The Workcentre fence is used to guide the work through the planer to produce a straight and true face. Inaccuracy from the planer shoe, following the work, is eliminated. Remove a fraction of a millimetre with each cut - or up to 3mm each pass if your planer is up to the job.

During the cut, adjustable pressure fingers hold your work piece against the fence, preventing the timber from wandering and being cut unevenly or out of parallel. All you need to do is push your material through for a perfect result every time.
• The Planer Attachment Kit accepts fitting of most 82mm planers.
• Suits Series 2000 Workcentre and MK3 Workcentre with the use of an adaptor kit (EPA061).

The Dust Collector (DCA300) prevents saw dust filling up or clogging your vacuum cleaner.

It provides a huge 20 litre capacity and can also be used with just about any product with dust extraction outlets.

Protect your health and keep your workshop clean with the Triton Workcentre Dust Bag (DCA250).

Combined with a vacuum connection to the overhead guard it collects almost 100% of the dust created in the tablesaw mode

Fully adjustable from 15° to 90°, enables you to bevel rip or chamfer long and wide pieces.

Triton's unique Biscuit Joiner (BJA300) quickly fits to the Triton Router Table for fast, strong and invisible joints.

Triton's unique Biscuit Joiner (BJA300) quickly fits to the Triton Router Table for fast, strong and invisible joints.

Features
• Ideal for Bevel, Mitre, Rail-to-stile, Edge-to-edge, End-to-end, Rail-to-post, Edge-to-face, Right angle joints and other forms of Edge joinery.
• Includes TCT cutter and pack of biscuits.
• Additional biscuits available in packs of 50 (BJA050) and 500 (BJA056).

Compatibility
• Biscuit Joiner model BJA300 suits Router Table model RTA300.
• Biscuit Joiner model BJA001 suits all earlier Triton Router / Jigsaw Tables manufactured since 1987 (with red plastic slide catches).
• Requires the use of a ½” or ¼” router.

A pair of retractable wheels provides easier mobility for the Series 2000 Workcentres.

They cope with rough terrain and even climb steps.

Get incredible control of your jigsaw for accurate curves and feature work.

Features
• Overhead blade stabiliser.
• Adjustable hold-down pressure for steady operation.
• Quick-mount clamps ensure fast removal and re-fitting of the jigsaw.
• Dust extraction for continuous visibility of the cut.

Compatibility
• Only suits Triton Router Table.
• Suits most jigsaws.

Suits most routers for cross trenching on the Triton Workcentre.

• Suits most routers for cross trenching on the Triton Workcentre.
• Also suits fitting of most jigsaws for use with early model Triton Router and Jigsaw Tables (manufactured prior to model RTA300).

Compatibility
• Suits Series 2000 Workcentre and MK3 Workcentre.
• Suits most ½" and ¼" routers - "D" handle models not suitable.
• Triton Precision Router is recommended.

The Triton Saw Stabilising Bracket triangulates the support of the saw motor for non-Triton power saws.

The Triton Workcentre can deliver the required accuracy - provided your saw is up to the job. For a truly rigid saw, we suggest you fit the Triton Saw Stabilising Bracket, which triangulates the support of the saw motor. It minimises saw deflection when cutting under load, and saw slump when the saw is changed from the table saw to the crosscut mode, or vise-versa.

The bracket is fully adjustable for various cutting depths and angles. With most saws you don't need to adjust the bracket when changing blade depth.