Click to change size
It is always difficult to fit plugs perfectly; any slight runout in your drill press quill can make the holes oversize. Unfortunately, this runout will also make plugs undersize. The combination leads to ill fitting plugs that ar every noticable. Snug Plug cutters are designed to cut slightly tapered plugs; the first 1/8" of the plug is the ststed size (1/4", 5/16", etc.) & then flares out at a 3 degree included angle. Unlike regular plug cutters, they also shave the plug sides for very smooth plugs. you just tap a plug into a hol until you meet resistance, then cut off the excess. You will then have a nearly invisible line betweem the plug & the workpiece. These plug cutters are reamed after hardening to ensure perfect concentricity. 3/8" shanks. Sharpening instructions included.
