Woodworking Products by Trend  Woodworking Products by Triton  Woodworking Products by Veritas  Woodworking Products by Robert Sorby  Woodworking Products by Tormek  Proxxon Tools  Woodworking Products by Liberon  Woodworking Machinery by SIP  Woodworking Machinery by Charnwood  Woodworking Glue by Gorilla

The Woodworking Centre - for all your woodworking needs

Online Catalogue > Brands > Robert Sorby >  Robert Sorby Modular Tool Rest System


Robert Sorby Modular Tool Rest System


Click to change size

½" DIAMETER STEM X 4½"

Manuf. Ref : 765/S13


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S13

5/8
Click to change size

5/8" DIAMETER STEM X 4½"

Manuf. Ref : 765/S16


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S16

3/4
Click to change size

3/4" DIAMETER STEM X 4½"

Manuf. Ref : 765/S19


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S19

7/8
Click to change size

7/8" DIAMETER STEM X 4½"

Manuf. Ref : 765/S22


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S22

1
Click to change size

1" DIAMETER STEM X 4½"

Manuf. Ref : 765/S24


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S24

1 1/8
Click to change size

1 1/8" DIAMETER STEM X 4½"

Manuf. Ref : 765/S28


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S28

25mm DIAMETER STEM X 4
Click to change size

25mm DIAMETER STEM X 4½"

Manuf. Ref : 765/S13


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S25

30mm DIAMETER STEM X 4
Click to change size

30mm DIAMETER STEM X 4½"

Manuf. Ref : 765/S30


Price: 8.21 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 765/S30

BOX SCRAPER PLATFORM - Click to change size
Click to change size

BOX SCRAPER PLATFORM

Manuf. Ref : 768


Price: 9.17 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 768

9
Click to change size

9" EXTERNAL BOWL CROSSBAR

Manuf. Ref : 767E


Price: 21.52 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 767E

9
Click to change size

9" INTERNAL BOWL CROSSBAR

Manuf. Ref : 767


Price: 21.52 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 767

9
Click to change size

9" CROSSBAR

Manuf. Ref : 766/9


Price: 19.80 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 766/9

6
Click to change size

6" CROSSBAR

Manuf. Ref : 766/6


Price: 17.51 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 766/6

4
Click to change size

4" CROSSBAR

Manuf. Ref : 766/4


Price: 14.75 (Including VAT at 20%)

Quantity:  


Most turners have problems with their lathe tool rest. The majority are either cast or made from low grade and tend to be relatively soft. As a result , when a square tool, like a parting tool, is used it can dig into the rest creating a series of notches. This in turn makes it very difficult to produce a smooth flow along the rest when trying to take an even cut. The cross bars from the new Modular Tool Rest System are made from hardened steel, greatly reducing this problem and therefore enhancing the ease and enjoyment for the turner. This system has many design features that make it the MUST HAVE in every wood turner's workshop. The system is as easy as 1-2-3. First choose the Stem that fits your lathe - stems are available in 1/2",5/8",3/4",1",11/8", 25mm and 30mm diameter. Then select from the Crossbar range the one that suits your requirements. Screw them together and you have a perfect toolrest. It is the interchangability of the system that makes is so simple to use on any lathe. Once you have the stem you can just keep on adding different Crossbars.

Manufacturer's Product Code : 766/4

MAGNETIC TOOL HOLDER - Click to change size
Click to change size

MAGNETIC TOOL HOLDER

Manuf. Ref : 985


Price: 12.53 (Including VAT at 20%)

Quantity:  


A wall mounted unit that can be used to hold turning tools, calipers and other easy to loose accessories

Manufacturer's Product Code : 985

| Terms | Privacy Policy | Powered by Elysium:Online |