Online Catalogue | Brands | Proxxon Tools | Proxxon Handheld Tools - 230V

Proxxon Handheld Tools - 230V

Page: << < 1 2 3 4 > >> View All (38) Page: << < 1 2 3 4 > >> View All (38)

Proxxon : LONG NECK GRINDER LB/E Ref: PRO28485
Ideal for working on spots that are difficult to reach. With 100 mm long, slim spindle neck.

The Long-neck multi-tool LB/E with a gear unit made of diecast aluminium and 100 mm long, slim spindle neck (dia. 20 mm).
For working in places that are almost inaccessible for conventional drills: milling, sanding, polishing, drilling, deburring, trimming (particularly suitable for interior finishes).

A high-speed tool with balanced special motor. Infinitely adjustable electronic speed control (full-wave electronic). Ball-bearing precision shaft made of cut steel. Six 3-slot MICROMOT system collet chucks (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2 mm) ensure high concentricity. No jerking and knocking of the tool attachments. Spindle stopping fixture makes tool changing easier.

Technical data:
220 - 240 V, 50/60 Hz, 5000 - 20,000 rpm. Gear unit made of diecast aluminium. Main housing: glass-fibre reinforced POLYAMIDE. Length 300 mm. Weight 630 g. Shockproof according to Class 2. Thanks to the 20 mm spindle neck (MICROMOT system adaptation), the tool is also suitable for use on drilling stands and horizontal stands.

Packed in a practical plastic carrying case.

Note:
MICROMOT steel collet chucks are hardened, which gives them a high, consistent spring force. They retain the necessary precision even after long periods of use (no comparison to non-hardened, 4-slot collet chucks and ones made of brass or aluminium). Thanks to the 3 slot design, which is considerably more difficult to produce than a 4-slot design, the bed is better. This is important for the central grasping of shafts with a small diameter.

Manufacturer's Product Code : 28485

Price: £74.82

Quantity:

Proxxon : MOF ROUTER Ref: PRO28568
Ideal for slotting, rounding over, counter boring and stock removal in wood, plastic, acrylic plastic, MDF, Uriol, ceilings and many more.

Practical depth stop with pre-adjustment and fine adjustment of the cutting depth with a precision of 1/10 mm. Also enables plunge milling cutting to be carried out with the motor running.
Spindle stopping makes tool change easier.
Basic housing and base plate made of diecast aluminium with a POLYCARBONATE coating on the underside for ideal gliding properties.
Powerful universal motor with 27,500 rpm.
Integrated extraction feature with flexible special hose (300 mm) and adapter for normal vacuum cleaners (we recommend the use of our dust extraction control unit AS/E).
Sturdy parallel and circular stop (with centring pin) made of diecast aluminium for precise guidance.
Cutters are held in place by the MICROMOT system collet chucks for exact concentricity (one each for 1.0 - 1.5 . 2.0 - 2.4 - 3.0 and 3.2 mm in a practical storage block).

Housing basis and base plate made of diecast aluminium. Upper part of housing made of glass fibre reinforced POLYAMIDE.

Technical data:
220 - 240 V, 130 W, 27,500 rpm, cutting depth up to 20 mm. Base plate 70 x 100 mm. Total height 150 mm. Weight 650 g.

Manufacturer's Product Code : 28568

Price: £68.71

Quantity:

Proxxon : IB/E DRILL/GRINDER Ref: PRO28481
Use for drilling, milling, grinding, polishing, cleaning, cutting, carving, engraving & signing.

Ball bearing spindle of ground steel with lock button for rapid cutter changing
Quiet, powerful 100W motor with full wave electronics for speeds between 5,000 & 20,000rpm

Streamlined head of die-cast aluminium for exact bearing seats and optimal stability
Quality without compromise: isolation according to Class 2 requirements

With 34 bits and cutters of industrial quakity, all shafts 2.35mm. Complete with six triple slit steel collets covering 1.0 to 3.2mm

This high-revving, special balanced, low noise DC motor has full-wave electronic speed control. The ground steel spindle runs in a ball bearing. Six high concentricity Micromot collets, (1.0, 1.5, 2.0, 2.4, 3.0 & 3.2mm and closure nut) are included.

Technical data:

Speed 5,000 to 20,000 rpm. Power consumption (max) 100W, 220-240V. Stable head of die-cast aluminium and main housing of glass-fibre reinforced Polyamide. length 230mm. Weight approx. 500g. Insulated to class 2. The 20mm Micromot collar allows fitting of optionaldrill stands, horizontal stands, etc. Supplied with 34 bits and cutters in a stable plastic box.

Manufacturer's Product Code : 28481

Price: £71.00

Quantity:

Page: << < 1 2 3 4 > >> View All (38)